![]() 填写范例：
n 教育、进修经历 2018.09–2022.06 华南理工大学 材料科学与工程 工学博士 2008.09 -2011.06 湖南大学 材料加工工程 硕士 2004.09 -2008.06 湖南大学 材料成形与控制工程 学士 n 代表性科研项目 1. 国家自然科学基金 青年科学基金项目 主持 2024/01-2026/12 2. 广东省基础与应用基金 青年科学基金项目 主持 2022/10-205/09
n 代表性论文、著作等 [1]Xianna Meng , Datong Zhang * , et al.，Influence of solution treatment on microstructures and mechanical properties of a naturally-aged Al–27Zn–1.5Mg–1.2Cu–0.08Zr aluminum alloy, Mater. Sci. and Eng. A802(2021)140623. [2]Xianna Meng, Datong Zhang, Weiwen Zhang, Cheng Qiu, Achieving high damping capacity and strength simultaneously in a high-zinc aluminum alloy via melt spinning and hot extrusion, Mater. Sci. and Eng. A, 833(2022)142376. [3]Xianna Meng, Datong Zhang *, Weiwen Zhang, et al.，Microstructure and mechanical properties of a high-Zn aluminum alloy prepared by melt spinning and extrusion, J. Alloy Compd. 819(2020)152990. [4]Wanglin Chen, Yonghao Huang,Hui Xiao,Xianna Meng*(通讯作者),The thermal process for hardening the nitrocarburized layers of a low-carbon steel, Scripta Mater., 210,2022,114467. ![]() [5]Xianna Meng, Datong Zhang *, Weiwen Zhang, et al.，Microstructure and mechanical properties of a high-Zn aluminum alloy prepared by melt spinning and extrusion, J. Alloy Compd. 819(2020
)152990. [6]Xianna Meng, Cong Li, Wanglin Chen*, Effects of Ti/B addition on microstructure and mechanical propertis of as-hot-rolled high strength Nb-containing steels, J. Mater. Eng. Perform.25(2016) 3472–3481. [7]Xianna Meng, Lixing Ding , Hui Xiao , Cong Li , Daoda Zhang , Yi Wang, Wanglin Chen. A study of microstructures and corrosion behavior of HVOF/PVD duplex coating against 10 vol% HCl solution.Surface and Coatings TechnologyVolume 476, 30 January 2024, 130227. [8] Xianna Meng, Cheng Qiu , Wanglin Chen , Datong Zhang. A comparative study on microstructures of a high-Zn AlZnMgCuZr alloy fabricated by casting and melt spinning. Journal of Materials Research and TechnologyVolume 32, September–October 2024, 13-22.
|
